Silicone Rubber (HCR) Extrusion
Extrusion · Wire & Cable
For cables, wires and heater wires in the electrical and electronics industries, as well as food container gaskets and industrial tubes.
Applications
- Cable & Wire
- Heater wire
- Gasket
- Hose
- Tube
- Kitchenware packing
Typical Properties by Grade (per Catalog)10 grades
| Grade | Application | Product | Appearance | Specific Gravity | Williams Plasticity | Organic Peroxide | Linear Shrinkage (%) | Curing Condition | Mechanical PropertiesKS M6518 | Compression Set (%)180℃/22hr | Heat Resistance250℃/72hr | Oil ResistanceIRM903 Oil, 150℃/72hr | Volume Resistivity (Ω·cm) | Reference | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Trade Name | PHR | Press Cure℃/min | Post Cure℃/hr | HardnessShore A | Tensile Strengthkgf/cm² | Elongation at Break% | Tear Strengthkgf/cm · Type B | Hardness Δ | Tensile Δ% | Elongation Δ% | Hardness Δ | Tensile Δ% | Elongation Δ% | Volume Δ% | ||||||||||
| 압출 / 전선용 Extrusion / Wire & Cable | Cable, Heater Wire, Gasket, Hose, Cook container packing gasket | TS 503/75U | Milky-White 유백색 | 1.43 | 220 | SC-2 | 1.2 | – | 120/5 | 200/4 | 73 | 75 | 250 | 17 | – | – | – | – | – | – | – | – | – | – |
| 압출 / 전선용 Extrusion / Wire & Cable | Cable, Heater Wire, Gasket, Hose, Cook container packing gasket | TS 509/75U | Milky-White 유백색 | 1.59 | 220 | SC-2 | 1.2 | – | 120/5 | 200/4 | 75 | 54 | 120 | 10 | – | – | – | – | – | – | – | – | – | – |
| 압출 / 전선용 Extrusion / Wire & Cable | Cable, Heater Wire, Gasket, Hose, Cook container packing gasket | TS 505/70-2WH-U | Milky-White 유백색 | 1.59 | 230 | SC-2 | 1.2 | – | 120/5 | 200/4 | 75 | 68 | 150 | 10 | – | – | – | – | – | – | – | – | – | – |
| 압출 / 전선용 Extrusion / Wire & Cable | Cable, Heater Wire, Gasket, Hose, Cook container packing gasket | TS 505//70-2BRD-U | Red ocher 베니가라 | 1.59 | 230 | SC-2 | 1.2 | – | 120/5 | 200/4 | 75 | 68 | 150 | 10 | – | – | – | – | – | – | – | – | – | – |
| 압출 / 전선용 Extrusion / Wire & Cable | Cable, Heater Wire, Gasket, Hose, Cook container packing gasket | TS 502/xx | 고객요구색상 | 1.32 | 220 | SC-2 | 1.2 | – | 120/5 | 200/4 | 60 ~ 75 | <90 | 220 | 26 | – | – | – | – | – | – | – | – | – | – |
| 압출 / 전선용 Extrusion / Wire & Cable | Cable, Heater Wire, Gasket, Hose, Cook container packing gasket | TS 503/xx | 고객요구색상 | 1.43 | 220 | SC-2 | 1.2 | – | 120/5 | 200/4 | 60 ~ 75 | < 85 | <250 | <20 | – | – | – | – | – | – | – | – | – | – |
| 압출 / 전선용 Extrusion / Wire & Cable | Cable, Heater Wire, Gasket, Hose, Cook container packing gasket | TS 504/xx | 고객요구색상 | 1.47 | 230 | SC-2 | 1.2 | – | 120/5 | 200/4 | 60 ~ 75 | < 65 | <200 | <20 | – | – | – | – | – | – | – | – | – | – |
| 압출 / 전선용 Extrusion / Wire & Cable | Cable, Heater Wire, Gasket, Hose, Cook container packing gasket | TS 505/xx | 고객요구색상 | 1.59 | 240 | SC-2 | 1.2 | – | 120/5 | 200/4 | 60 ~ 75 | < 70 | <150 | <15 | – | – | – | – | – | – | – | – | – | – |
| 압출 / 전선용 Extrusion / Wire & Cable | Cable, Heater Wire, Gasket, Hose, Cook container packing gasket | TS 509/xx | 고객요구색상 | 1.59 | 240 | SC-2 | 1.2 | – | 120/5 | 200/4 | 60 ~ 75 | < 60 | <150 | <10 | – | – | – | – | – | – | – | – | – | – |
| 압출 / 전선용 Extrusion / Wire & Cable | Cable, Heater Wire, Gasket, Hose, Cook container packing gasket | TS 510/XX | 고객요구색상 | 1.59 | 240 | SC-2 | 1.2 | – | 120/5 | 200/4 | 60 ~ 75 | < 50 | <120 | <10 | – | – | – | – | – | – | – | – | – | – |
← Swipe the table sideways →
Same layout as the product catalog (Apr 2026). Values are typical measurements based on KS M6518, not specifications, and may vary with curing agent and cure conditions.
Grades per TDS2 grades
| Grade | Appearance | Specific gravity | PlasticityWilliams, mm/100 | HardnessShore A | Tensile strengthkgf/cm² | Elongation% | Tear strengthkgf/cm | Volume resistivityΩ·cm | Dielectric strengthkV/mm |
|---|---|---|---|---|---|---|---|---|---|
| TS 505/70U | Milky white | 1.60 | 210 | 70 | 69 | 150 | 10 | 1015 | 27 |
| TS 505/70-2RD U | Reddish brown | 1.60 | 210 | 70 | 65 | 150 | 12 | 1015 | 27 |
← Swipe the table sideways →
The grades below are not in the catalog; values are from the TDS, converted to kgf units.
XX stands for the required hardness.
Technical Data Downloads
TDS files are in English; MSDS (Material Safety Data Sheets) are Korean PDFs. Please contact us for grades without an MSDS.